Measurement Workflow
Define sensing, display, logging, communication, standby and startup states.
INDUSTRIAL EQUIPMENT BATTERY SYSTEMS
Custom Handheld Instrument Battery Solutions
Custom battery systems for handheld test and measurement instruments, defined around stable measurement sessions, display and sensor loads, field runtime, charging access, connector integration and repeatable production.
HANDHELD MEASUREMENT WORKFLOWS
Runtime and Power Stability Must Follow the Measurement Task
Handheld instruments move between standby, sensing, display, data logging and communication states. The battery must support the complete field task while fitting the enclosure, charging method and service strategy of the final instrument.
EQUIPMENT INPUTS
Inputs That Define a Handheld Instrument Battery
The first review connects the measurement workflow with the equipment power profile and field-use conditions.
Runtime Target
Define continuous use, daily sessions, reserve time and charging opportunities.
Electrical Interface
Confirm voltage window, normal load, peak demand, charging input and connector.
Field & Service Conditions
Define temperature, handling, replacement method, sealing and target service life.
BATTERY–EQUIPMENT INTEGRATION
Power Integrity, Runtime and Portable Integration Must Be Coordinated
Usable energy and current capability must be evaluated with the complete instrument so that measurement, display and data functions remain stable through the intended operating window.
Stable Instrument Supply
Coordinate voltage behaviour with sensing, display and data-acquisition electronics.
Field Runtime
Size usable energy from the actual task cycle rather than a nominal capacity target alone.
Charging & Connector Fit
Match the charging source, DC connector, cable routing and user workflow.
Service & Production Control
Define replacement, inspection, traceability and final instrument testing.
REFERENCE CONFIGURATIONS
Documented Handheld Instrument Reference
The configuration below is a documented project reference for handheld test equipment. Only confirmed parameters are shown; unavailable values are marked “/”. It is not a fixed off-the-shelf model.
Project parameterHow it is defined
ModelST-HI-01
ApplicationHandheld test equipment
Nominal voltage12 V
Rated capacity1.2–5.2 Ah
Nominal energy14.4–62.4 Wh
Maximum charge current2 A
Continuous discharge current5 A
ConnectorDC connector
Communication/
Protection / operating conditions/
Customization noteAll electrical parameters, communication protocols, protection requirements and operating conditions can be customized according to your equipment and application requirements. If you cannot find the required specification, contact STELLOVA for a custom solution.
VALIDATION & PRODUCTION READINESS
Verification Must Match the Final Equipment and Operating Cycle
Electrical performance, charging, protection, mechanical integration and production controls are verified against the approved battery definition and the final host equipment.
Load-Profile Verification
Check normal, startup, peak and pulse demand against the approved operating cycle.
Equipment Integration
Verify charging, status, fault response, connector and service behaviour in the host equipment.
Environmental & Mechanical Review
Select temperature, vibration, shock, dust and moisture tests from the real installation and use conditions.
Controlled Production
Release approved specifications, test limits, inspection criteria and traceability requirements before volume production.
FROM LOAD PROFILE TO CONTROLLED PRODUCTION
Define, Integrate, Verify and Release
Stellova translates equipment loads, operating cycle, charging, environment and interfaces into a controlled battery definition, coordinates prototype integration and supports production release against the approved requirements.
Review the Engineering Process ↗DISCUSS YOUR HANDHELD INSTRUMENT BATTERY PROJECT
Share the Measurement Workflow and Field Runtime Target
Send the instrument type, voltage window, measured loads, operating states, runtime target, charging source, connector, available space, environment, target market and forecast volume.
Discuss Your Industrial Battery Project ↗