Cleaning-cycle load
Document drive, brush, pump and controller demand across representative cleaning modes.
POOL CLEANING ROBOT BATTERY SYSTEMS
Custom Pool Cleaning Robot Battery Solutions
Stellova develops 10.8V pool cleaner battery configurations and other custom pool robot battery systems around propulsion, pump load, submerged runtime, sealing interfaces and charging workflow. Where an IP65 robot battery requirement is specified, the protection target and final enclosure integration must be verified for the actual equipment.
POOL CLEANER OPERATING REQUIREMENTS
Underwater Runtime Depends on More Than Capacity
A pool cleaning robot combines drive motors, pumps, brushes, control electronics and communication while operating in a wet, chemically exposed environment. Battery sizing must account for the full cleaning cycle and return or recovery reserve.
BATTERY DEFINITION INPUTS
Define the Cleaner, Duty Cycle and Charging Method First
Early estimates are sufficient for the first review; the final pack is defined after the equipment loads, installation envelope and environmental requirements are confirmed.
Runtime and recovery reserve
Define the complete route time plus the energy required for safe recovery after a low-battery event.
Sealed mechanical integration
Confirm available space, mounting, cable exit, connector and enclosure interfaces before pack layout.
Charging and communication
Define charger voltage and current, charging contacts, wake-up logic and RS485, RS232 or CAN requirements.
POOL-ENVIRONMENT ENGINEERING
Sealing, Corrosion Exposure and Communication Must Be Coordinated
Electrical design, enclosure sealing, connector strategy, thermal behavior and communication should be reviewed as one system rather than separate component choices.
Water and chemical exposure
Define immersion, splash, chlorine, salt, cleaning-agent and storage conditions for the actual cleaner.
Sealing and connector strategy
Coordinate enclosure seams, pressure behavior, cable glands, connectors and service access with the target IP requirement.
Load variation
Include startup and stall events from drive motors, pumps and brushes—not only average power.
Temperature and lifecycle
Review pool temperature, outdoor storage, charging temperature and expected operating cycles before freezing the pack.
ACTUAL BATTERY CASE
One Verified Pool Cleaning Robot Reference Configuration
The configuration below is an actual project reference. It is engineering evidence, not a universal stock product. Only confirmed parameters are displayed.
Project parameterHow it is defined
ModelST-PC-01
ApplicationPool cleaning robot
Nominal voltage10.8 V
Rated capacity15 Ah
Nominal energy/
Charge limit voltage12.6 V
Charge current3 A
Continuous discharge current3 A
Peak discharge current7 A
CommunicationRS485 / RS232 / CAN
Protection / operating temperatureIP65; -10°C to 60°C
Customization noteAll electrical parameters, communication protocols, IP ratings and operating temperature ranges can be customized according to your equipment and application requirements. If you cannot find the required specification, contact STELLOVA for a custom solution.
POOL CLEANER BATTERY FAQ
Questions to Resolve Before Prototype Release
The final answers depend on the cleaner design, duty cycle, charging arrangement and target environment.
How is runtime estimated?
Use representative drive, brush, pump and controller loads across the complete cleaning cycle, plus recovery reserve.
Is IP67 automatically required?
No. The required sealing level and validation method depend on the equipment enclosure and actual water exposure.
Can communication be customized?
Yes. RS485, RS232, CAN and application-specific message definitions can be evaluated for the target controller.
Is ST-PC-01 a standard stock product?
No. It is a verified project reference; the production battery is customized and approved for the target cleaner.
CUSTOMIZATION & RFQ
Provide the Cleaner Platform and Operating Profile
Share the equipment voltage, motor and pump loads, target runtime, battery compartment, charging method, connector, communication, water and chemical exposure, certification needs and forecast volume.
Review the Engineering Process ↗DISCUSS YOUR APPLICATION
Share Your Pool Cleaner Platform and Duty Cycle
Send the available cleaner, load, charging and environmental data. Stellova will identify the missing inputs that materially affect runtime, sealing, communication and prototype risk.
Discuss Your Pool Cleaning Robot Battery ↗